This machine has top/Bottom drill headswith PLC Control System for Glass Hole Glass Drilling Machine. adopts timing relay controller and oil damping technology The centering of drill hole can be positioned by means of mechanical method or laser. Pneumatic clampers grip glass with adjustable pressure. The machine has two working status automatic and manual. In manual mode. the machine work one cycle. In automatic mode, the machine works continuously. The machine is featured by its high working efficiency, low glass damage and easy operation.
The machine has three control models:
1. Manual control for upper drilling bit
2. Upper bit Automatically Drilling
3. Continuous drilling is possible for the upper bit after every regular time ( time can be adjusted)
1) Technical Specification
1. The thickness of processed glass:3mm--25mm
2. Drilling diameter: φ3mm-φ100mm (Can be customized up to φ220mm)
3. Maximum size of processed glass: 2600×1800mm
4. Occupying area: 2500×1700×1700mm
5. Total power: 4KW
6. Gross weight: 950kg
2) Processing Precision's Inspection and Acceptance
1. The coaxial error of upper and lower main spindles is less than ¢ 0.2mm.
2. The perpendicularity error between the worktable and axis of the main spindle is less than 0.12mm within ¢300mm.
3. Run out of spindle taper hole central line: 50mm away from spindle nose is 0.1mm.
4. The glass hole diameter error for processing glass is less than 0.3 mm, glass hole rough edges error for processing glass is less than 0.5mm.
3) The processed glass is pneumatically gripped, drilling is alternatively done by upper and lower drills.
Feeding is automatically operated.
The operation platform can be pneumatically elevated for moving glass. It can operate on a wide surface.
Total Weight: 15500kg
Working Table Height: 900mm±20mm
Machine Take Up Space: 14783x13980x2200mm
Please look for our "Champion" trademark when purchasing glass machinery! It will bring you excellent quality assurance and high-quality after-sales service.